Unpacking The Magarrow; Recommended Non-Magnetic Lithium Polymer Batteries - Geometrics MagArrow User Manual

MagArrow uses non-magnetic lithium polymer batteries for power. These batteries should be sourced
locally by the user.
As the MagArrow gathers data in the field, it stores the data in a binary format onto the SD card
(*.magdata). This binary data can then be downloaded onto a PC, tablet, or cell phone via the system's
on-board Wireless access point. Software is provided that converts the binary data into a CSV file for use
in Surfer, Geosoft, Quinsy, and other magnetic data processing programs.

Unpacking the MagArrow

Your MagArrow shipped in a rugged black case. The case has latches that require you to first push the
button on the latch before raising the latch and opening the lid. To close the latches, just push down on
them.
When unpacking your MagArrow, you'll notice that it was placed inside the case upside down. This is to
ensure the MagArrow sits securely in the foam.
The case should also contain:

AC Power Adapter

Screwdriver & Drill Bit (JIS#1)

USB Drive with User Manual and Survey Manager Software

Recommended Non-Magnetic Lithium Polymer Batteries

Please note that batteries have not shipped with your MagArrow. The recommended non-magnetic
1800 mAh lithium polymer batteries and battery charger need to be sourced locally.
5