Table of Contents
Advertisement
6
i
NOTE
If device is currently
in schedule, setting
temperature manual-
ly will override it (see
"weekly schedule and
Override Mode" on
page 15).
COnTROLLInG THE TEMPERATuRE
#4: Controlling the temperature
You can set temperature using app (10-30°C) or directly on the device
(16-24°C). During manual temperature change LED ring colour corre-
sponds to the temperature set-point.
To check and change the temperature on the device:
1. Bring your hand close to the sphere.
2. LED ring will:
• Glow if temperature was set manually,
• Pulse slowly if device is in schedule mode,
• Pulse quickly if device is in override mode.
with colour depending on set temperature:
Temperature [°C]
Valve closed
(anti-freeze)
16°C or lower
24°C or higher
Valve fully opened
3. Turn the sphere counter-clockwise to lower temperature or turn
clockwise to raise the temperature.
Lower temperature
4. Remove the hand from the sphere, after 5 seconds LED will fade
and new temperature will be set.
Colour
white
Blue
17°C
Azure
18°C
Cyan
19°C
Spring green
20°C
Green
21°C
Chartreuse
22°C
Yellow
23°C
Orange
Red
Magenta
(30°C)
Raise temperature
Advertisement
Table of Contents
