Fading In Or Out - Sony CDP-CE545 Operating Instructions Manual

Recording From CDs
7
When you record on side B, reverse the tape and
press H or X on the player to resume playing.
To cancel Time Edit
Press CONTINUE.
z
You can program the tracks you want in advance
Create a program selecting the desired tracks, then
follow Steps 2 to 7. Be careful that the total playing time
of the program does not exceed the tape length of one
side.
z
You can freely specify the tape length
Set the tape length using the l AMS L control in
Step 3.
Example: When the tape length of one side is 30 minutes
and 15 seconds
1 To set the minutes, turn l AMS L until
"30" appears in the display, then push
l AMS L.
2 To set the seconds, turn l AMS L until
"15" appears in the display, then push
l AMS L.
z
You can check and change the program
See page 18.
22

Fading In or Out

You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.
E D I T / T I M E F A D E
F A D E R
To
Press FADER
Start play fading in
During pause.
display and the Q indication
flashes. The play fades in.
End play fading out
When you want to start fading out.
FADE
the q indication flashes. The play
fades out and the player pauses.
Note
Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 13), the play
fades out for about 2 seconds.
Changing the fading time
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don't change it, fading
lasts for 5 seconds.
1
Press FADER before you start playing.
"FADE 5 SEC" appears in the display.
2
Press m/M to specify the fading time.
H X
m/M
FADE
lights up in the
lights up in the display and