Sony BDV-IS1000 Operating Instructions Manual page 127

Symptom
Bonus contents or other data that
are contained in a BD-ROM
cannot be played.
A message indicating that the
local storage does not have
enough space appears on the
screen.
The unit does not work and
"CHILD LOCK" appears in the
front panel display when you
press any button on the unit.
The S-AIR function
Symptom
S-AIR connection is not
established (sound transmission
is not established), e.g., the
indicator of the S-AIR sub unit
does the following:
• Turns off.
• Flashes.
• Turns red.
No sound is heard from the
S-AIR sub unit.
There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m (26
Remedy
• Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
re-insert the external memory (page 55). 4 Turn the system on. 5 Check that
the EXTERNAL indicator lights up in the front panel display. 6 Insert the BD-
ROM with BonusView.
• Delete unnecessary data in the external memory (page 69).
• Set the child lock function to off (page 106).
Remedy
• If you use another S-AIR main unit, place it more than 8 m (26
from the unit.
• Confirm the ID of the unit and S-AIR sub unit (page 89).
• You performed pairing the unit and another S-AIR sub unit. Perform pairing of
the desired S-AIR sub unit (page 92).
• The unit is paired to another S-AIR sub unit. To cancel pairing, reset the ID of
the unit and S-AIR sub unit (page 89).
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
• If you use another S-AIR main unit, place it more than 8 m (26
from the unit.
• Confirm the ID of the unit and S-AIR sub unit (page 89).
• Confirm the pairing setting (page 92).
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the [S-AIR RF Change] setting (page 94).
• Change the ID settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn on them.
from the unit.
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• Change the [S-AIR RF Change] setting (page 94).
• Change the ID settings of the S-AIR main unit and S-AIR sub unit.
1
/ feet) away
4
1
/ feet) away
4
1
/ feet) away
4
127
US