Using The Sound Effect - Sony BDV-IS1000 Operating Instructions Manual

Controlling the Sony
component, CATV, or set-top
box/digital satellite receiver
You can control the Sony component such as a
VCR or DVD player/recorder, CATV, or set-top
box/digital satellite receiver using the following
buttons. To use these buttons, set the remote to
the STB mode by pressing STB (STB lights up
for 1 second).
Note
• During the STB mode, if you press any of the
following buttons, STB lights up. (Depending on the
manufacturer setting, some buttons may not work,
and STB does not light up.)
• When you press other than the following buttons
during the remote is in the STB mode, STB does not
light up.
• Depending on the component, you may not be able to
control the component or to use some of the buttons.
By pressing You can
AV "/1
Turn the set-top box/digital
satellite receiver on or off.
CH +/– Select the set-top box/digital
satellite receiver channel.
Number buttons, Select the set-top box/digital
, ENTER satellite receiver channel.
HOME Display the menu of the set-top
box/digital satellite receiver.
TOOLS Display the operation menu for the
current display.
RETURN Return to the previous channel or
layer on the menu of the set-top
box/digital satellite receiver.
CLEAR Clear the entry field.
C/X/x/c,
Select the item on the menu.
DVD Change the operation mode for
RECORDER Sony DVD recorders.
(HDD, DVD)*
H* Start playback.
X* Pause playback.
x*
Stop playback.
* Briefly fast forward the scene.
m/M*
Fast reverse/fast forward during
playback.
* Only available for Sony component such as a VCR,
DVD player/recorder, etc.

Using the Sound Effect

Enjoying the sound at low
volume
You can enjoy sound effects or dialog, as you
would in a movie theater, even at low volume. It
is useful for watching movies at night.
Press NIGHT.
"NIGHT ON" appears in the front panel display
and the sound effect is activated.
During the night mode is on, "NIGHT" lights up
in the front panel display.
Note
• When sound is output from the center speaker, this
effect is more pronounced, as speech (movie dialog,
etc.) is easy to hear. When sound is not output from
the center speaker, or you are using the headphones,
the system optimally adjusts the volume.
To turn off the sound effect
Press NIGHT so that "NIGHT" disappears from
the front panel display.
Adjusting the sound
You can adjust the sound by changing the tonal
balance of the sound.
1
Press TONE repeatedly until the
desired setting appears in the front
panel display.
• "BASS": You can adjust the bass
frequencies.
• "MIDDLE" (BDV-IS1000 only): You
can adjust the middle frequencies.
• "TREBLE": You can adjust the treble
frequencies.
2
Press X/x to adjust the sound.
The adjusted value appears in the front
panel display. You can set the value from
–6.0 to +6.0.
105
US