Page 1
ALL.FG.175240.00 OWNER’S INSTRUCTION MANUAL Please read this manual carefully to ensure correct operation and care of the machine. If you use the AS175 cor rectly, it will provide you with years of reliable service saving you time and money. Double Insulation used throughout, no provision for earthing.
1) Motor ..................................7 2) Belt and Pulleys ................................8 3) Blade Mount Bolts and Threads ..........................8 4) Blades and Teeth ...............................8 7. WARRANTY AND SERVICE ............................8 8. TROUBLESHOOTING ..............................9 Please read these instructions before you use your AS175 Brick & Mortar Saw...
120mm (4 3/4”), cut square corners and make 1) Work area variable width cuts. The AS175 is ideally suited to a variety of tasks including: a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
d) Store idle power tools out of the reach of 3) Personal safety children and do not allow persons unfamiliar a) Stay alert, watch what you are doing and use with the power tool or these instructions to common sense when operating a power tool. Do operate the power tool.
Never start or operate the tool with fingers or AS175 uses a variety of blades to suit the material other objects through the holes in the blades. being cut. Blades may also be changed to suit the required depth or length of cut.
30mA or less. TPTR_8119_7 tptr_8119_7.asm Lock on button TPTR_9094_0_RH tptr-9094-0-rh.asm AS175-P022-0 optibelt_pj280.prt The AS175 is supplied ready for operation. However in OPTIBELT_PJ_EXT_IDLER optibelt_pj260.prt Top Handle OPTIBELT_PH optibelt_ph.prt some cases the blades may need to be changed to suit OPTIBELT_EPJ optibelt_epj.prt...
Damage caused by dust will lead to premature failure of the motor, which will affect The AS175 should be fitted with a Dust Boot and the warranty. used with a dust extraction vacuum. The Dust Boot...
(13.2ft-lb), Fig.8 4) How to Use Direction of cut Fig.5 CAUTION: During operation the AS175 may cause hand-arm vibration, which can result in fatigue or discomfort after long periods of continuous use. Vibration will increase with the hardness of material.
Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. Use a clean, dry cloth only. Lubrication ARBORTECH tools are properly lubricated at the factory Clearance and are ready for use. each end Accessories...
ARBORTECH. www.arbortech.com.au Brushes The AS175 is fitted with Auto-cut off brushes. When the brushes are worn below minimum length they stop tool operation reducing internal motor damage. Contact your local dealer or authorised service center for brush replacement.
Handle rubber mounts damaged or worn - replace. One or both conrods/ blades loose, even when • Leaf spring failure - contact ARBORTECH authorised service centre. mounting bolts tightened Tool running and blades • Loose belt or broken belt- re-tension or replace as necessary.
Need help?
Do you have a question about the AS175 and is the answer not in the manual?
Questions and answers