Ac Hookups; Before You Use Your Receiver - Sony STR-GA7ES Operating Instructions Manual

VCR (via the VIDEO 1 jacks)
If you have two VCRs connect the second one to the VIDEO
2 jacks.
Receiver
VIDEO 1
OUT IN
VIDEO VIDEO
OUT IN
AUDIO AUDIO
OUT IN
L
R
LD player
Receiver
LD
IN
VIDEO
IN
AUDIO
IN
L
R
You can play decoded AC-3 soundtracks through the
speakers connected to the receiver.
If you have an AC-3 decoder you can use the receiver to
listen to decoded AC-3 soundtrack with the following
connections (see page 10 for details regarding
operation).
Receiver
5.1 INPUT
FRONT REAR
CENTER
WOOFER
Where do I go next?
Go on to the next section to connect an AC plug and
complete your home theater system.

AC Hookups

If your receiver has a voltage selector on the rear panel
Your receiver operates on either 120, 220 or 240 V AC. Before
VCR
connecting the unit to a wall outlet, be sure to set the voltage
OUTPUT INPUT
selector on the rear of the unit to the appropriate position
VIDEO VIDEO
according to your local power supply.
AUDIO AUDIO
L
R
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
If you connect other audio components to the
LD SWITCHED AC OUTLET(s) on the receiver, the
OUTPUT receiver can supply power to the connected
VIDEO
components so you can turn on/off whole system
when you turn on/off the receiver.
AUDIO
L
R
Caution
AC-3 decoder
Make sure that the power consumption of the component(s)
(etc.)
connected to the receiver's AC outlet(s) does not exceed the
PRE OUT
REAR FRONT
wattage indicated on the rear panel. Do not connect high-
CENTER
wattage electrical home appliances such as electric irons,
fans, or TVs to this outlet.
WOOFER
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.

Before You Use Your Receiver

Before you start using your receiver, make sure that
you have:
Turn on the receiver and check the following indicator.
Getting Started
220V
240V
120V
SWITCHED AC OUTLET(s)
• Turned MASTER VOL to the leftmost position (0).
• Selected the appropriate speaker system. (For
details, see "Selecting the speaker system" on
page 7.)
• Set BALANCE to the center position.
• Press MUTING on the remote if the MUTING
indicator turns on.
/
to a wall
outlet
9 EN