Advanced Adjustments And Settings; Assigning The Component Video Input; Component Video Input Assign; Switching The Audio Input Mode For Digital Components - Sony STR-DV10 Operating Instructions Manual

Advanced Adjustments and Settings

Assigning the component
video input
— COMPONENT VIDEO INPUT
ASSIGN
You can assign a component video input for
another visual input.
1
Press MAIN MENU repeatedly to select
" CUSTOM ".
2
Press or repeatedly to select
"COMP. V. A.".
3
Press ENTER.
4
Press or repeatedly to select the
component video input you want to
assign.
5
Turn the –/+ jog dial to select the input
you want to assign the component
video input jacks selected in step 4.
The input you can assign varies for each
component video input. For details, see
"Selectable component video inputs for
each input".
6
Press ENTER.
Selectable component video
inputs for each input
The initial settings are underlined.
VIDEO 2
VIDEO 1, VIDEO 2, VIDEO 3
DVD
VIDEO 1, VIDEO 3, DVD
Note
You cannot assign a visual input to more than one
component video input.
Switching the audio input
mode for digital
components

— INPUT MODE

You can switch the audio input mode for
components which have digital audio input
jacks.
1
Press input buttons to select the input.
2
Press INPUT MODE repeatedly to
select the audio input mode.
The selected audio input mode appears in
the display.
Audio input modes
• AUTO IN
Gives priority to digital signals when there are
both digital and analog connections. If there
are no digital signals, analog is selected.
• COAX IN
Specifies the digital audio signals input to the
DIGITAL COAXIAL input jack.
• OPT IN
Specifies the digital audio signals input to the
DIGITAL OPTICAL input jacks.
• ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
Notes
• When signals with a sampling frequency of more
than 48 kHz is input, the equalizer and sound field
cannot be used.
• Some audio input modes may be dimmed depending
on the input. This means that the selected input is
unavailable.
35 US