Black & Decker Start-It Jump 'n Charge VEC012BBD User Manual

Smart battery charger/jump-starter

Advertisement

VEC012BBD_ManualEN_020106
2/1/06
TWO YEAR LIMITED WARRANTY PROGRAM
This limited warranty program is the only one that applies to this product, and it sets forth all the
responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than
those described herein. Any implied warranty of merchantability or fitness for a particular purpose on
this product is limited in duration to the duration of this warranty.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in
materials and workmanship for two years from the date of purchase without additional charge. The
warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for
any amount of damage in excess of the retail purchase price of the product under any circumstances.
Incidental and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to damage to units from
misuse or incorrect installation/connection. Misuse includes wiring or connecting to improper polarity
power sources.
RETURN/REPAIR POLICY: Defective products may be returned to manufacturer. Any defective product
that is returned to manufacturer within 30 days of the date of purchase will be replaced free of charge.
If such a product is returned more than 30 days but less than two years from the purchase date,
manufacturer will repair the unit or, at its option, replace it, free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer's option.
A unit may be replaced with a new or reconditioned unit of the same or comparable design. The
repaired or replaced unit will then be warranted under the terms of the remainder of the warranty
period. The customer is responsible for the shipping charges on all returned items. During the warranty
period, manufacturer will be responsible for the return shipping charges to the customer in the United
States.
LIMITATIONS: This warranty does not cover accessories, such as charging adapters, bulbs, fuses and
batteries, damage or defects resulting from normal wear and tear (including chips, scratches, abrasions,
discoloration or fading due to usage or exposure to sunlight), accidents, damage during shipping to our
service facility, alterations, unauthorized use or repair, neglect, misuse, abuse, failure to follow
instructions for care and maintenance, fire, flood and Acts of God.
If your problem is not covered by this warranty, call our Technical Support Department toll free at (800)
618-5178 for general repair information and charges if applicable. You may also contact us through
our website at www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations
on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential
damages, so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser
specific legal rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax
or mail (see below). We suggest that you keep the original packaging in case you need to ship the unit.
When returning a product, include your name, address, phone number, dated sales receipt (or copy)
and a description of the reason for return and product serial number. After repairing or replacing the
unit, we will make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector
Manufacturing. Enter "VEC012BBD" as Model and "START-IT
Vector products must be registered within 30 days of purchase to activate this warranty. Mail the
completed registration form, along with a copy of the original sales receipt, to:
ATTN.: CUSTOMER SERVICE
4140 SW 30th Ave., Ft. Lauderdale, FL 33312
• TOLL FREE: (800) 618-5178 •
WARRANTY IS NON-TRANSFERABLE.
© 2006 VECTOR MANUFACTURING
MADE IN CHINA
3:13 PM
Page 12
®
Jump 'n Charge
" as Product Type. All
BD020106
12
START-IT
Jump 'n Charge
Smart
Battery Charger/Jump-Starter
with 450 Instant Starting Amps
12 Volt DC Power Supply • LED Emergency Area Light
USER'S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE
INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.
Toll Free: (800) 618-5178
www.vectormfg.com
VEC012BBD
®

Advertisement

Table of Contents
loading

Summary of Contents for Black & Decker Start-It Jump 'n Charge VEC012BBD

  • Page 1: Warranty Information

    VEC012BBD_ManualEN_020106 2/1/06 3:13 PM TWO YEAR LIMITED WARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than those described herein.
  • Page 2 VEC012BBD_ManualEN_020106 2/1/06 3:13 PM IMPORTANT SAFETY INSTRUCTIONS WARNINGS 1. RISK OF EXPLOSIVE GAS MIXTURES — WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME BEFORE USING THIS UNIT, YOU READ THIS MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY.
  • Page 3: Table Of Contents

    VEC012BBD_ManualEN_020106 2/1/06 3:13 PM 7. When disconnecting charger, disconnect AC cord, remove clamp from vehicle chassis, and then remove clamp from battery terminal. 8. Do not charge the battery while the engine is operating. 9. See operating instructions for length of charge information. Follow these steps when the battery has been removed from a vehicle.
  • Page 4: Features

    VEC012BBD_ManualEN_020106 2/1/06 3:13 PM Smart ™ Battery Charger Smart ™ Battery Chargers feature 3-stage, high-efficiency charging technology, built-in microprocessor control that ensures fast, safe and complete charging of serviceable batteries. STAGE ONE BEEP BEEP STAGE TWO OFF BEEP Stage One — Rapid Start Charge at 10 amps delivers maximum charging amperage to “wake up”...
  • Page 5: Using The Battery Charger

    VEC012BBD_ManualEN_020106 2/1/06 3:13 PM by the microprocessor. The charger will stop charging if the rate is too fast or too slow for the battery size or condition. Alternator Check — is a quick check that measures the battery voltage. This check is repeated at various electrical load levels and the tests allow the user to determine if the alternator can keep up with the loads.
  • Page 6: Alternator Check

    VEC012BBD_ManualEN_020106 2/1/06 3:13 PM Alternator Check Part 1 No Load (Turn OFF all vehicle’s accessories): The battery must be fully charged before testing the alternator. Run the engine long enough to achieve normal idle speed and verify there is a no-load voltage. 1.
  • Page 7: Using The 12 Volt Dc Power Supply

    VEC012BBD_ManualEN_020106 2/1/06 3:13 PM • Never touch RED and BLACK clamps together — this can cause dangerous sparks, power arcing, and/or explosion. • Vehicles that have on-board computerized systems may be damaged if vehicle battery is jump-started. Before jump-starting this type of vehicle, read the vehicle owner’s manual to confirm that external-starting assistance is advised.
  • Page 8: Fuse Replacement

    VEC012BBD_ManualEN_020106 2/1/06 3:13 PM Fuse Replacement (DC Charger Adapter) 1. Remove the plug from the accessory receptacle. Remove the gold cap by turning counterclockwise and lifting off. 2. Remove the center pin and spring. Remove the fuse. 3. Replace the fuse with a same type and size fuse (8 amp). 4.

Table of Contents