Table of Contents
Advertisement
IoD Display Module Series
Legal Notice
Proprietary Information
The information contained in this document is the property of 4D Systems Pty. Ltd. and may be the subject of patents
pending or granted, and must not be copied or disclosed without prior written permission.
4D Systems endeavours to ensure that the information in this document is correct and fairly stated but does not
accept liability for any error or omission. The development of 4D Systems products and services is continuous and
published information may not be up to date. It is important to check the current position with 4D Systems. 4D
Systems reserves the right to modify, update or makes changes to Specifications or written material without prior
notice at any time.
All trademarks belong to their respective owners and are recognised and acknowledged.
Disclaimer of Warranties & Limitation of Liability
4D Systems makes no warranty, either expressed or implied with respect to any product, and specifically disclaims all
other warranties, including, without limitation, warranties for merchantability, non-infringement and fitness for any
particular purpose.
Information contained in this publication regarding device applications and the like is provided only for your
convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with
your specifications.
Images and graphics used throughout this document are for illustrative purposes only. All images and graphics used
are possible to be displayed on the 4D Systems range of products, however the quality may vary.
In no event shall 4D Systems be liable to the buyer or to any third party for any indirect, incidental, special,
consequential, punitive or exemplary damages (including without limitation lost profits, lost savings, or loss of
business opportunity) arising out of or relating to any product or service provided or to be provided by 4D Systems,
or the use or inability to use the same, even if 4D Systems has been advised of the possibility of such damages.
4D Systems products are not fault tolerant nor designed, manufactured or intended for use or resale as on line control
equipment in hazardous environments requiring fail – safe performance, such as in the operation of nuclear facilities,
aircraft navigation or communication systems, air traffic control, direct life support machines or weapons systems in
which the failure of the product could lead directly to death, personal injury or severe physical or environmental
damage ('High Risk Activities').
of fitness for High Risk Activities.
Use of 4D Systems' products and devices in 'High Risk Activities' and in any other application is entirely at the buyer's
risk, and the buyer agrees to defend, indemnify and hold harmless 4D Systems from any and all damages, claims, suits,
or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any 4D Systems
intellectual property rights.
Contact Information
For Technical Support:
www.4dsystems.com.au/support
For Sales Support:
sales@4dsystems.com.au
Website:
www.4dsystems.com.au
© 2017 4D SYSTEMS
4D Systems and its suppliers specifically disclaim any expressed or implied warranty
Copyright 4D Systems Pty. Ltd. 2000-2017.
Page 22 of 22
IoD-09TH/SM
www.4dsystems.com.au
Advertisement
Table of Contents
