Advertisement
Quick Links
R
R OAD RAGE
2015 edition
FT TYPE: Utility
© madbeanpedals
1.25" W x 0.825"H
2015 change-log: Removed 10R current limiting resistor. Made space for TO-220 sized regulator.
Terms of Use: You are free to use purchased Road Rage circuit boards for both DIY
and small commercial operations. You may not offer Road Rage boards for resale or as
part of a "kit" in a commercial fashion. Peer to peer re-sale is, of course, okay.
Advertisement
Related Manuals for Mad Bean Pedals Road Rage
Summary of Contents for Mad Bean Pedals Road Rage
- Page 1 2015 change-log: Removed 10R current limiting resistor. Made space for TO-220 sized regulator. Terms of Use: You are free to use purchased Road Rage circuit boards for both DIY and small commercial operations. You may not offer Road Rage boards for resale or as...
- Page 2 1- Voltage Inverter: Allows you to flip a +9v supply to a -9v supply. This is useful for positive ground effects such as PNP fuzzes. Using the Road Rage will allow you to use your standard negative tip power supply or wall wart instead of a special power supply or battery.
- Page 3 “CPA” and “SCPA” types. You need the “SCPA” type. The MAX one only has the CPA, but that is the correct one to use for the Road Rage. The LT1054 does not have the CPA or SCPA category.
- Page 4 No matter if you are using a positive or negative ground circuit always connect ground from the Road Rage to the ground on your circuit. In the case of a fuzz, we just connect -9 to the -9v supply pad on the fuzz circuit board. It is that simple.