Table of contents Table of contents General notes............................... 4 1.1 Further information........................... 5 1.2 Notational conventions........................6 1.3 Symbols and signal words....................... 6 Safety instructions............................. 8 Features............................... 12 Installation and starting up........................ 13 Connections and controls........................14 Technical specifications........................19 Plug and connection assignment....................
General notes General notes This manual contains important instructions for the safe operation of the unit. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the device. If you sell the unit please make sure that the buyer also receives this manual.
General notes 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of Keyword search interest for you quickly.
General notes 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’...
Page 7
General notes Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions Safety instructions Intended use This device is intended to be used for amplification and playback of signals from musical instruments with electromagnetic pickups. Any other use or use under other operating condi‐ tions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Page 9
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged.
Page 10
Safety instructions NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture.
Page 11
Safety instructions NOTICE! External power supply The device is powered by an external power supply. Before connecting the external power supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual cur‐ rent circuit breaker.
Features Features Special features of the device: Built-in Bluetooth function 30 watt RMS 5" woofer 1" tweeter Connections: – Mic / Line input, designed as XLR / 1/4" combo socket – AUX input, designed as 3.5 mm phone socket – Headphones output, designed as 3.5 mm phone socket Guitar / Microphone, Bass, Treble, Reverb and Master Volume controls Standby function...
Installation and starting up Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Connections and controls Connections and controls Top side guitar combo...
Page 15
Connections and controls 1 Bluetooth button To establish a Bluetooth connection, press and hold the Bluetooth button for 2 seconds to search for Bluetooth-ena‐ bled devices ready for pairing. The Bluetooth button flashes blue. The Bluetooth list of the device to be paired dis‐ plays ‘TableAmp’...
Page 16
Connections and controls 8 Headphones output, designed as 3.5 mm phone socket 9 AUX input, designed as 3.5 mm phone socket guitar combo...
Page 17
Connections and controls Rear panel TableAmp BlueTooth...
Page 18
Connections and controls 10 Signal source selector switch (guitar or microphone) 11 Mic / Line input, designed as XLR / 1/4" combo socket. 12 Socket for connecting the supplied plug-in power supply 13 LED status indicator Control LED for the power supply. The LED lights up when the device is turned on or in standby mode. 14 Main switch Turns the device on and off.
Technical specifications Technical specifications Speaker 1 × 5" woofer 1 × 1" tweeter Output power 30 W (RMS) Frequency range 30 Hz to 20 kHz Signal-to-noise ratio ≥70 dB Operating supply voltage Plug-in power supply (15 V / 2.4 A ) Dimensions (W ×...
Plug and connection assignment Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured. Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’...
Page 21
Plug and connection assignment Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference. 1/4" TS phone plug (mono, unbalanced) Signal Ground, shielding 1/4"...
Page 22
Plug and connection assignment Three-pole 1/8" mini phone jack (stereo, unbalanced) Signal (left) Signal (right) Ground, shielding XLR plug (balanced) Ground, shielding Signal (in phase, +) Signal (out of phase, –) Shielding on plug housing (option) guitar combo...
Protecting the environment Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Need help?
Do you have a question about the Harley Benton TableAmp BlueTooth and is the answer not in the manual?
Questions and answers