Storing the adjusted
settings
— USER PRESET
You can store the adjusted sound field settings,
etc. as USER PRESET up to 3 and can easily
apply.
Setting the USER PRESET
1
Adjust the sound field, etc.
For the settings you can store, see "Settings
that can be stored in USER PRESET".
2
Rotate MAIN MENU to select
"CUSTOMIZE".
3
Rotate MENU to select "USER PRESET
MEM.? [X]".
4
Rotate –/+ to select the USER PRESET
number.
5
Press MEMORY/ENTER.
6
To store other settings, repeat steps 1
to 5.
Settings that can be stored in
USER PRESET
• Input selected by the INPUT SELECTOR
• INPUT MODE setting
• Selected sound field
• MULTI CH IN setting
• DIRECT setting
• C.WIDTH setting
• DIMENSION setting
• PANORAMA MODE setting
• EFFECT LEVEL setting
• FRONT REVERB setting
• SCREEN DEPTH setting
• VIR.SPEAKERS setting
• Tuner settings (band, frequency, stereo/mono
setting, preset number)
US
48
To use the USER PRESET
1
Press USER PRESET repeatedly to
select the USER PRESET you want.
2
Press MEMORY/ENTER.
Note
When the DIGITAL ASSIGN setting is changed after
you store a USER PRESET and if the stored INPUT
MODE setting cannot be used, a selectable setting is
applied automatically.
Example:
*1
Use the DIGITAL ASSIGN function to assign
"DVD OPT" to "TAPE".
*2
Set the INPUT MODE of TAPE to "AUTO 2CH" or
"OPTICAL FIXED", then store in the USER
PRESET.
*3
Use the DIGITAL ASSIGN function to assign
"DVD OPT" to "DVD".
*4
Select the USER PRESET stored in example 2).
The INPUT MODE of TAPE is automatically set to
"ANALOG 2CH FIXED". You cannot select
"AUTO 2CH" or "OPTICAL FIXED".