Sony STR-DA3100ES Operating Instructions Manual page 29

L SLEEP: Lights up when sleep timer is
activated.
M D.RANGE: Lights up when dynamic range
compression is activated (page 46).
N EQ: Lights up when the equalizer is activated.
O Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 25–26 for tuner operations.
P 96/24: Lights up when the receiver is
decoding DTS 96 kHz/24 bit signals.
Q MATRIX: Lights up when DTS-ES Matrix
decoding is activated.
R DISCRETE: Lights up when DTS-ES
Discrete decoding is activated.
S CINEMA: Lights up when DTS Neo:6
Cinema decoding is activated.
T NEO:6: Lights up when DTS Neo:6 Cinema/
Music decoding is activated.
U MUSIC: Lights up when Pro Logic II Music,
Pro Logic IIx Music or DTS Neo:6 Music
decoding is activated.
V MOVIE: Lights up when Pro Logic II Movie
or Pro Logic IIx Movie decoding is activated.
W GAME: Lights up when Pro Logic II Game or
Pro Logic IIx Game decoding is activated.
X ; PRO LOGIC IIx: "; PRO LOGIC"
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. "; PRO LOGIC II" lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. "; PRO LOGIC IIx" lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to "NO" and you
select a sound field using the A.F.D. button.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals and for signals with a
sampling frequency of more than 48 kHz.
Y L.F.E.: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel. When the sound of the LFE
channel signal is actually being reproduced,
the bars underneath the letters lights up to
indicate the level. Since the LFE signal is not
recorded in all parts of the input signal the bar
indication will fluctuate (and may turn off)
during playback.
29 US