Parts And Controls - Sony CAV-M1000ES Installation Manual

Parts and Controls

Front panel of the Main Unit
1 2
1 ?/1 (POWER) switch
Press to turn the power on or off.
2 Learning IR window
Used to input remote codes into the Main
3 Display window
Displays various information.
4 Mode indicators
Display the current mode. These indicators turn off in
the NORMAL mode.
5 ZONE +/–
Press to select the zone in the NORMAL mode.
6 SOURCE SELECT +/–
Press to select the source component in the NORMAL
mode.
7 RS232C connector
Used to update the firmware of the Main Unit and to
upload/download setup data from a computer using
an RS232C cross cable.
3
CHECK LEARN SETUP
PROGRAM
ENTER MODE
RS232C
7 8 9 q;
8 PROGRAM
Press to initiate a firmware update.
9 Cursor/ENTER
Unit. Press to select a menu.
0 MODE
Press repeatedly to select the mode.
qa BACK
Press to return to the previous layer of the menu.
qs CANCEL
Press to cancel the present operation and return to the
NORMAL mode.
qd ZONE VOLUME +/–
Press to adjust the volume of the selected zone.
qf ALL ZONE MUTING
Press to set muting on or off in all zones.
4 5
ZONE
ZONE VOLUME ALL ZONE
BACK CANCEL MUTING
qa qs qd qf
6
SOURCE SELECT
7 US