GE Monogram ZUG30 Installation Instructions Manual page 6

In front of unit, unplug the power cord and replace with the 'Y' splitter supplied in the kit. On the ends of the splitter,
plug in the transformer (black and white leads) and the power cord plug.
Unplug main power cord
Attach heater lead wires to transformer lead wires (blue and green leads connect to the heater).
Heater leads
10. Reattach front toeckick and air vent cover.
11. Attach front trim piece, provided in kit, along length of units from top to bottom, by snapping into the clips that
were attached in step 3).
Trim cover snaps into the front six spacer clips
NOTE: PRODUCT IMPROVEMENT IS A CONTINUING ENDEAVOR AT
GENERAL ELECTRIC. THEREFORE, MATERIALS, APPEARANCE AND
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
GE Appliances & Lighting
General Electric Company
Louisville, KY 40225
GEAppliances.com
Strain relief
'Y' splitter
From Transformer
Vent Cover
To transformer
Main power cord