Listening To The Sound Without Any Adjustment (Analog Direct); Resetting Sound Fields To The Initial Settings - Sony 3-284-083-41(1) Operating Instructions Manual

Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
?/1
SPEAKERS
(ON/OFF)
AUTO CAL MIC
MEMORY/ TUNING
ENTER MODE TUNING
PHONES
Sound field
buttons
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press ANALOG DIRECT on the
receiver.
The analog audio is output.
To cancel ANALOG DIRECT
Press ANALOG DIRECT on the receiver
again.
You can also press any sound field buttons.
Note
When headphones are connected, "HP DIR" appears
on the display.
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
ANALOG
DIRECT MUTING
2CH A.F.D. MOVIE MUSIC
1 2
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1,2
?/1
SPEAKERS
(ON/OFF)
AUTO CAL MIC
MEMORY/ TUNING
ENTER MODE TUNING
PHONES
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
"S.F. CLR." appears on the display and
all sound fields are reset to their initial
setting.
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
ANALOG
DIRECT MUTING
2CH A.F.D. MOVIE MUSIC
2
49 GB