Sony TA-VE910 Operating Instructions Manual page 32

Additional Information
Remote
Button
0-9, >10
CH/PRESET
+/–
DISC
D.TUNING
D. SKIP
SHIFT
0/)
=/+
P
(
p
9
r
r + (
EN
32
Operates Function
Tuner Selects preset numbers.
CD player/MD Selects track numbers.
deck/LD player 0 selects track 10.
TV/VCR Selects channel numbers.
Tuner Scans and selects preset
stations.
TV/VCR Selects preset channels.
CD player Selects discs (CD player
with multi-disc changer
only).
Tuner Selects the direct tuning
mode.
CD player Skips discs (CD player with
multi-disc changer only).
Tuner Selects the memory bank.
CD player Searches tracks (forward or
backward).
Tape deck/MD Fast forwards or rewinds.
deck/VCR/LD
player
CD player/ Skips tracks.
MD deck/LD
player
CD player/ Pauses play or record. (Also
Tape deck/MD starts recording with
deck/LD components in record
player/VCR standby.)
CD player/ Starts play.
Tape deck/MD
deck/LD
player/VCR
CD player/ Stops play.
Tape deck/MD
deck/LD
player/VCR
Tape deck Starts play on the reverse
side.
Tape deck Sets tape decks to the record
standby mode.
Tape deck/MD Starts recording when
pressed with ( (or 9 on
deck/VCR
tape deck).
Remote Operates
Button
RMS Tape deck
DIRECTION
RMS CLEAR Tape deck
RMS Tape deck
DIRECTION
9/(
ENTER TV/VCR/DBS
tuner/CD
player
VISUAL TV/VCR/DBS
POWER tuner/LD
player
-/- - TV
SUB CH +/– TV
POSITION TV
SWAP TV
P IN P TV
JUMP TV
ANT TV/VTR VCR
MASTER VOL TV
+/–
MUTING TV
SLOPE —
5.1 INPUT —
*
RMS: Random Music Sensor
**
Only for Sony TVs with the picture-in-picture function
Function
Selects tape direction (tape
*
decks with the RMS
function only).
*
Clears RMS program (tape
decks with the RMS
function only).
Programs tracks (tape deck
*
with the RMS function
only).
Changes channels/discs
when used with 0-9.
Turns on or off the power.
Selects the channel entry
mode, either one or two
digit (in Europe only).
Selects preset channels for
**
the small picture.
Changes the position of the
**
small picture.
Swaps the small and the
**
large picture.
Activates the picture-in-
**
picture function.
Jumps back and forth
between the previous and
current channels.
Selects output signal from
the antenna terminal: TV
signal or VCR program.
Normally, adjusts the
master volume of the
amplifier.
If TV CONTROL ON was
pressed, it adjusts the
volume on the TV.
Normally, mutes the sound
from the amplifier.
If TV CONTROL ON was
pressed, the sound on the
TV itself is muted.
Not applicable.
Not applicable.