Table of Contents
Advertisement
9 Copy the three sample JPG images from the Sample Playlist Files folder to the root
directory of the SD card, as shown in Example 3:
10 Remove the SD card from your card reader and insert the SD card into your BrightSign.
11 Turn on your BrightSign.
12 As BrightSign boots, the power LED lights up. After it finishes booting, you should see
IMAGE1.JPG on your display followed by IMAGE2.JPG and IMAGE3.JPG several seconds
later. BrightSign repeats this slide show until you turn off the power.
•
12
•
•
EXAMPLE 3: Root of SD card with playlist and 3 JPG images
Advertisement
Table of Contents
