Playing The Demo - Roku BrightSign HD110 Quick Start Manual

Playing the demo

BrightSign provides two Quick Start Demos that you can run on your BrightSign. The demo you
use depends on the type of display you connected to your BrightSign. Follow these steps to
play the demo:
1 Connect a display and speakers to your BrightSign as described earlier in this guide.
2 If your BrightSign package includes demo SD cards, go to step 3.
If your BrightSign package does not include demo SD cards, download the demo from
www.brightsign.biz/support/quickstart.php
onto an SD card:
•
If you connected your BrightSign to a VGA display, download the demo labeled VGA.
•
If you connected your BrightSign to an HDMI or component display, download the demo
labeled HDMI/Component.
3 Insert the SD card that contains the demo into your BrightSign.
NOTE: If you're using a demo SD card that came with your BrightSign, make sure you use the
card that matches the display you connected to your BrightSign: VGA or HDMI/Component.
4 Turn on the power.
•
8
•
•
, and then use a card reader to copy the demo