Table of Contents
Advertisement
6 On the first line of your Notepad file, set the
video mode by entering one the following:
•
If your BrightSign is connected to a VGA display,
enter: Videomode 1024x768x75p
•
If your BrightSign is connected to an HDMI
display, enter: Videomode 1280x720x60p
7 On separate lines, type the name of each JPG
file located in the Sample Playlist Files folder,
as shown in Example 2.
8 Save the text file with the name AUTOPLAY.BSP
in the root of the SD card:
Click File > Save As.
a
In the Save in field, select the root of the
b
SD card as the place to store the file.
In the File name field, enter
c
AUTOPLAY.BSP.
In the Save as type field, select All Files.
d
Click Save. That's it. You just created a
e
simple playlist that loops three images.
Example 2a: Playlist for VGA display
Example 2b: Playlist for HDMI display
•
11
•
•
Advertisement
Table of Contents
