Component Identification - M-system 53U Operating Manual

COMPONENT IDENTIFICATION

FRONT VIEW
Data Displays
Control Buttons
∑ IU
CONTROL BUTTON OPERATIONS
BUTTON OPERATION
∑
IU
PQS
PF THD
MAX ENTER
E PRG ESCAPE
∑ Hold down
IU Hold down
E PRG ESCAPE Hold down
+
IU PF THD
+
∑ E PRG ESCAPE
PQS Hold down
HOW TO CHANGE VALUES (e.g. 5.000A to 150.0A)
press
∑ button
3 times
press
button
PQS
5 times
press
∑ button
once
press
button
PF THD
5 times
press
∑ button
once
press
button
PF THD
once
Press
PQS PF THD
Press
∑ IU
Pressing at the leftmost digit shifts the value on display to the right by 1 digit.
∑
The decimal point and unit are also switched to appropriate ones.
PQS PF THD MAX E PRG
ENTER ESCAPE
NORMAL MODE
Indicates values
∑
Indicates Voltage or Current
Indicates Power
Indicates Power Factor or THD
Indicates totalized values
(max., min., average/demand)
Switches Energy readings
Switches to My Default mode
Switches to PC Configuration mode
Switches to Setting mode
Hold down Indicates Harmonics by degrees
Switches Energy reading units
Hold down
Indicates the shortcut menu
to increase or decrease the value.
to move between digits.
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
REAR VIEW
Voltage Input
Terminals
Auxiliary Power
Supply Terminals
Ext. Interface
Terminals
FUNCTIONS
SETTING MODE
Go Left
Go Right
Go Down
Go Up
Selects menu; Enables setting changes
Cancels setting changes
----
----
----
----
----
----
53U
Current Input
Terminals
Configurator
Jack
EM-6485-B Rev.21 P. 4 / 52