Texas Instruments bq27750EVM User Manual
Texas Instruments bq27750EVM User Manual

Texas Instruments bq27750EVM User Manual

1-series li-ion battery pack manager evaluation module

Advertisement

Quick Links

bq27750EVM 1-Series Li-Ion Battery Pack Manager
This evaluation module (EVM) is a complete evaluation system for the bq27750 battery management
system. The EVM includes one bq27750 circuit module and a link to the Microsoft
software. The circuit module includes one bq27750 integrated circuit (IC) and all other onboard
components necessary to monitor and predict capacity, monitor critical parameters, protect the battery
from overcharge, over-discharge, short-circuit, and overcurrent in 1-series cell Li-Ion or Li-Polymer battery
packs. The circuit module connects directly across the battery. With the EV2300 or EV2400 interface
board and software, the user can read the bq27750 data registers, program the chipset for different pack
configurations, log cycling data for further evaluation, and evaluate the overall functionality of the solution
under different charge and discharge conditions using I
.......................................................................................................................
1
1.1
1.2
1.3
1.4
2
2.1
2.2
2.3
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
4
4.1
4.2
1
2
3
4
Data Memory Screen
5
6
Authentication Screen
SLUUBP4 - June 2017
Submit Documentation Feedback
..........................................................................................................
...............................................................................................
......................................................................................................
...........................................................................................
................................................................................................
................................................................................................
...............................................................................................
....................................................................................................
...............................................................................................
..................................................................................................
............................................................................................
...............................................................................................
.............................................................................................
.........................................................................................
......................................................................................................
....................................................................................................
......................................................................................................
...............................................................................................
.......................................................................................................
.......................................................................................................
..................................................................................
............................................................................................................
........................................................................................................
...........................................................................................................
.....................................................................................................
bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module
Copyright © 2017, Texas Instruments Incorporated
Evaluation Module
2
C communication protocol.
Contents
...............................................
..................................................................
.........................................................................
.................................................................
.........................................
........................................................................
User's Guide
SLUUBP4 - June 2017
Windows
based PC
®
®
2
2
2
2
3
3
3
3
4
5
5
6
7
7
10
10
12
13
14
15
15
16
16
17
17
20
4
5
6
7
8
10
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the bq27750EVM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments bq27750EVM

  • Page 1: Table Of Contents

    ......................Registers Screen ................ Battery Management Studio Supported Targets ......................Data Memory Screen ......................Calibration Screen ..................... Authentication Screen SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 2: Features

    ........................Schematic Features The EVM supports the following features: • Complete evaluation system for the bq27750EVM 1-series battery pack manager evaluation module • Populated circuit module for quick setup • Software that allows data logging for system analysis Kit Contents The following items are supplied with the EVM kit: •...
  • Page 3: Bq27750 Circuit Module Performance Specification Summary

    Find the latest software version in the bq27750 tool folder on www.ti.com. Use the following steps to install the bq27750 Battery Management Studio software: 1. Download and run the Battery Management Studio setup program from the Development Tools section of the bq27750EVM product folder on www.ti.com. See Section 3 for detailed information on using the tools in the Battery Management Studio.
  • Page 4: Evm Connections Module Connections

    Data flash parameters should be updated to fine tune the gauge to the pack. See the bq27750 Technical Reference Manual (SLUUBI6) for help with setting the parameters. bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback...
  • Page 5: Battery Management Studio

    Battery Management Studio Starting the Program Run Battery Management Studio from the Start | Programs | Texas Instruments | Battery Management Studio sequence or the Battery Management Studio shortcut. As long as the device has been woken up from shutdown mode by momentarily pressing button S1 or applying a charger voltage, the gauge will be...
  • Page 6: Registers Screen

    Refresh (single-time scan) button is selected, or it scans continuously if the Scan button is selected. The continuous scanning period can be set via the | Windows | Preferences | Register selections. bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback...
  • Page 7: Data Memory Screen

    Calibration button is clicked. The Advanced Calibration window enables the internal temperature sensor as well as the external thermistor to be calibrated. SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 8: Calibration Screen

    Press the Calibrate Gas Gauge button to calibrate the temperature measurement system. • Deselect the Calibrate boxes after temperature calibration has completed. bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 9 Current Calibration The Board Offset Calibration option is not offered in Battery Management Studio, because it is not required when using the bq27750EVM. The Board Offset Calibration option is available in bqProduction. • Connect and measure a 2-A current source from 1N (–) and Charger-/Load- to calibrate without using the FETs.
  • Page 10: Authentication Screen

    Select the Chemistry ID that matches your cell from the table (see Figure • Press Update Chemistry from Database to update the chemistry in the device. bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 11: Chemistry Screen

    Battery Management Studio www.ti.com Figure 7. Chemistry Screen SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 12: Programming Screen

    Click the Execute FW to return the device to NORMAL mode after programming has completed, see Figure Figure 8. Programming Screen bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 13: Advanced Comm Screen

    With Impedance Track™ disabled, send Gauging() (0x0021) to ManufacturerAccess(). – Write to mac address 3e command 21 00 (see Figure SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 14: Golden Image

    ROM command, and so forth, to the golden files, as needed • Clicking the Create Image Files button, seeFigure 10 Figure 10. Golden Image Screen bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 15: Gpc Packager

    Add Register or Add Data Memory Item, these will be added to the table of values to be tracked. Figure 12. Watch Screen SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 16: Data Graph Screen

    3.13 Error Screen This keeps track of any error that may occur with bqStudio during usage. Figure 14. Error Screen bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 17: Circuit Module Physical Layouts And Bill Of Materials

    PCB layers and assembly drawings for the bq27750 module. Figure 15. Top Silk Screen Figure 16. Bottom Silk Screen SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 18: Top Assembly

    Circuit Module Physical Layouts and Bill of Materials www.ti.com Figure 17. Top Assembly Figure 18. Bottom Assembly bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 19: Top Layer

    Circuit Module Physical Layouts and Bill of Materials www.ti.com Figure 19. Top Layer Figure 20. Bottom Layer SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 20: Bill Of Materials And Schematic

    0402 GRM155R6YA105KE11D Murata C9, C10 0.1uF CAP, CERM, 0.1 µF, 6.3 V, +/- 10%, X5R, 0402 0402 GRM155R60J104KA01D Murata bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 21 SH-JP2, SH-JP5 Shunt, 100mil, Gold plated, Black Shunt 969102-0000-DA Test Point, Miniature, Black, TH Black Miniature Testpoint 5001 Keystone SLUUBP4 – June 2017 bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 22: Schematic

    10.0k ohm 1µF 5.1k 5.1k 0.1µF 0.1µF 0.1µF Net-Tie SGND 0.001 Copyright © 2017, Texas Instruments Incorporated Figure 21. Schematic bq27750EVM 1-Series Li-Ion Battery Pack Manager Evaluation Module SLUUBP4 – June 2017 Submit Documentation Feedback Copyright © 2017, Texas Instruments Incorporated...
  • Page 23 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 24 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 25 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿6丁目24番1号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
  • Page 26 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2017, Texas Instruments Incorporated...
  • Page 27 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
  • Page 28 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments BQ27750EVM-837...

Table of Contents