Download Print this page

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
OMEN X by HP Desktop PC 900
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
HDD Fan 170g and PCI Fan 170g and PSU fan
and CPU LC FAN 290g and GFX LC FAN 170g
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
5
1
7
6
Page 1

Advertisement

loading

Summary of Contents for HP OMEN X 900

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 19. Remove the PSU from chassis (see Figure 45-48) 20. Remove the Electrolytic Capacitors from PSU board HP P/N: 854201-003 (DPS-1300AB-5 A) (see Figure 49-60) 21. Remove the Electrolytic Capacitors from PSU board HP P/N: 854200-004 (Niagara 600W) (see Figure 61-73) 22.
  • Page 3 Figure1 Press the button on rear bezel Figure2 Remove the top cover Figure3 Release 12 screws Figure4 Release GXF and GFX bracket screw and cable then remove GFX card LC Figure5 Unplug the cable of fan and pump Figure6 Release the CPU Pump screw to remove CPU EL-MF877-00 Page 3 Template Revision B...
  • Page 4 Figure7 Unplug all cable conn from PCA. Figure8 Release 8 pcs screws from PCA Figure9 Remove PCA from chassis Figure10 Push the hooks on both sides and then pick up the memory Figure11 Rotate the handle and open it up Figure12 Remove the CPU from board EL-MF877-00 Page 4...
  • Page 5 Figure13 Remove the battery from the PCA Figure14 Release 2 pcs screws from MB tray and take off MB tray Figure15 Unplug all cable conn from function board PCA Figure16 Release 5 pcs screws from function board PCA Figure17 Open HDD Door and PUSH HDD locker to left Figure18 Pull up HDD cage and release 4 screws to remove HDD EL-MF877-00...
  • Page 6 Figure19 Use pin to open ODD Tray Figure20 Release ODD latch and hold Figure21 Press ODD unlock bar to PUSH off ODD Figure22 Open Voodoo grill cover Figure23 Disconnect cable Figure24 Remove Front bezel EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 Figure25 Remove Tape and unplug cable connect Figure26 release 14 screws to remove 3 front light board Figure27 Release 4 screws from rear cover Figure28 Remove Rear PSU Grille Figure29 Release 1 screws from AC_IN connect Figure30 Remove Rear cover EL-MF877-00 Page 7 Template Revision B...
  • Page 8 Figure31 Release 4 screws from 2 Antenna cable and Figure32 Release 4 screws from HDD FAN and remove it remove it Figure33 Remove FRONT_TOP_FILTER Figure34 Release 4 screws from PCI FAN and remove Figure35 Release 1 screw and take off cable holder Figure36 Release 2 screws from rear side EL-MF877-00 Page 8...
  • Page 9 Figure37 Release 2 screw at front side Figure38 Arrange all the cables those through the POWER PARTITION Figure39 Release 2 screw at the bottom of Figure 40 Rotate and take off power partition power partition Figure41 Release 2 screw from power Figure42 Release 4 screw to remove 2 HDD SATA partition and remove ODD cable EL-MF877-00...
  • Page 10 Figure43 Release 4 screw and remove 2 HDD SATA Figure44 Release 1 screws and unplug connect to cable remove extend power cord Figure45 Release 3 screws Figure46 Pull out PSU Figure47 Release 4 screw and remove psu bkt Fig 48 EL-MF877-00 Page 10 Template Revision B...
  • Page 11 Fig 49 Remove screws for top Figure50 Remove screws for back Figure51 Remove screw for profile Figure52 Disconnect fan connector Figure53 Cut the cable tie Figure54 Cut the cable tie EL-MF877-00 Page 11 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 12 Figure55 Remove FG screw Figure56 Remove MAIN PCB screw Figure57 Remove AC inlet screw Figure58 Remove component for MAIN PCB (C801A/C801B/C801C diameter or height are more than 25mm) Figure59 Remove fan screw EL-MF877-00 Page 12 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 13 Figure61 Cut the cable tie Figure62 Remove screw for bottom Figure63 Remove screw for top Figure64 Remove cover Figure65 Remove FG screw Figure66 Remove PCB2 screw EL-MF877-00 Page 13 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 14 Figure67 Remove plastic cover for PCB2 Figure68 Remove L/N wire & jump wire use solder iron Figure69 Disconnect fan connector Figure70 Remove PCB1 screw Figure71 Remove plastic cover for PCB1 Figure72 Remove AC inlet & Fan screw EL-MF877-00 Page 14 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 15 Figure73 Heat the solder of Electrolytic Capacitors Figure74 Release 4 screw from CPU LC Fan Guard greater than 2.5cm in diameter or height and remove it Figure75 Release 4 screw between Fan and Figure76 Release 4 screw between Fan and radiator radiator then remove CPU LC FAN then remove GFX LC FAN EL-MF877-00...