HP ProOne 600 G5 Disassembly Instructions page 3

Release 4 Phillips #2 screws then remove roof cover
by hands from top side..
Check hood sensor cable would be remove from hook
of FAN.
Release 4 T15 screws then remove heat sink.
Unplug LVDS FFC cable
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
Release 2 Phillips #2 screws then push out ODD kits.
Release 3 T15 screws then remove FAN from system.
Release 2 T15 screws then remove option board.
Unplug Power FFC, Speaker cable and CCD cable
Unplug Antenna cable, Back light cable, Hood sensor cable,
HDD FFC cable, Touch cable., Touch cable.
Don't unplug RTC battery.
EL-MF877-01
Page 3