Creating Your Own Program; Program Play - Sony CMT-HPX10W Operating Instructions Manual

Creating your own
program

— Program Play

You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programed tracks
onto a cassette tape (page 18).
Use buttons on the remote for the operation.
1
Press CD (or FUNCTION repeatedly)
until "CD" appears.
2
Press PLAY MODE in stop mode
repeatedly until "PGM" appears.
3
Press DISC SKIP repeatedly (or press
one of the disc buttons (DISC 1 – 5 and
DISC +1) on the unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with "AL" displayed.
4
Press ./> repeatedly until the
desired track number appears.
When programing an MP3, press ALBUM
+/– to select an album, then press ./
> repeatedly until the desired track
number appears.
Selected track number
Current disc
5
Press ENTER (or PLAY MODE on the
unit).
The track is programed.
The program step number appears,
followed by the total playing time.
Total playing time
6
Program additional discs or tracks.
To program
Other discs
Other tracks on the
same disc
Other tracks on
other discs
7
Press N (or CD/NX on the unit).
Program Play starts.
Other operations
To Do this
Cancel Program Press PLAY MODE in stop
Play mode repeatedly until "PGM"
disappears.
Clear a track from Press CLEAR in stop mode.
the end
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
(or FUNCTION on the unit repeatedly) until "CD"
appears, then press N (or CD/NX on the unit).
However, the program is cleared when you press Z
on the unit.
• "– –.– –" appears when the total CD program time
exceeds 100 minutes, or when you select a disc with
20 tracks or more, or when you select an MP3 audio
track.
Repeat steps
3 and 5
4 and 5
3 to 5
GB
13