Bosch Rexroth 31 Series Instruction Manual page 23

You can lift the axial piston unit as shown in Fig. 4 with the eye bolt screwed into the
drive shaft.
Fig. 4: Installing the eye bolt
Transporting with wARnInG! Danger from suspended loads!
lifting strap During transport with a lifting device, the axial piston unit can topple out of the
lifting strap and cause injury.
▶ Use the widest possible lifting strap.
▶ Make sure that the axial piston unit is securely fixed with the lifting strap.
▶ Only guide the axial piston unit by hand for fine positioning and to avoid swinging.
▶ Never stand or reach under suspended loads.
▶ Place the lifting strap around the axial piston unit in such a way that it does not
pass over assembled parts (e.g. valves, piping) and that the axial piston unit is
not suspended from assembled parts (see Fig. 5).
Fig. 5: Transporting with lifting strap
RE 92701-01-B/04.2018, A10VO, A10VSO Series 31, Bosch Rexroth AG
Transport and storage 23/60