Table of Contents
Advertisement
Getting Started
Unpacking
-This product has been packaged to protect it against transportation
packaging materials from around and inside the
insulation surrounding the pipes at the
in the safe
place;
it will help prevent any damage if the product needs to be transported in the
future
,
and you can use it to store the appliance when it is not in use. If the carton is to be
disposed
of,
please recycle all packaging materials where
-Plastic wrapping can be a suffocation hazard for babies and young
packaging materials are out of their reach and disposed of safely.
-Parts:
Check to ensure you have all the parts pictured on the previous page
-Unwind the power cord to its full length and inspect it for damage. Do not use the appliance if
the appliance or its cord have been damaged or are not working
contact our support line (1-844-455-3474) for advice on examination, repair or return of the
damaged product.
-Make sure the refrigerator is disconnected from the power supply before cleaning the interior
surfaces and all internal accessories with lukewarm
soap/detergent. This will remove any dust from transit and storage and help remove the typical
smell of a brand-new product. Then dry
detergents or powders as these will damage the
Door handle installation
The door handle comes unattached due to packaging
instructions
below.
-Fix the two screws (1) on the
door.
-Put the metal handle (2) into the two fixed
-Fasten the lower two screws (3) on the handle
damage.
Remove all
appliance,
but do not remove any foam
back.
Keep the original packaging carton and materials
possible.
children,
so ensure all
spread.
properly.
In case of damage,
water,
a soft cloth and a neutral/mild
thoroughly.
Important: do not use harsh or abrasive
finish.
restrictions.
It is easily attached following the
screws,
match the two holes on the
handle.
lower.
Hide quick links:
Advertisement
Table of Contents
