Page 1
WTBR 1000 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
Page 2
инструкция Prijevod originalnih uputa RO traducere a instrucțiunilor RU Оригинальное руководство по эксплуатации käännös G R Μετάφραση του πρωτοτύπου originale των οδηγιών χρήσης H R Prijevod originalnih uputa WTBR 1000 Software LL 150 WT1 / WT1H HER 120 OPERATING VIDEO INSTRUCTION...
Page 3
Ø 0,8 mm Ø 1,0 mm XTR A Ø 0,6 mm Ø 1,5 mm...
Risk of injury after opening the hood, as no protection against moving parts is provided. Avoid bad posture when using the unit, as this can lead to postural problems. The key-operated switch may only be used by specialist, trained personnel, who are Use the correct tool. Use only accessories or auxiliary devices which are included • fully aware of the risks involved in operating the machine without any protective in the list of accessories or approved for use by the manufacturer. Use WELLER function, thanks to their specialist qualification and experience. accessories or auxiliary devices on original WELLER equipment only. The use of other tools and other accessories can cause injury. The key must be kept in a safe place. • Do not leave the key in the switch during normal operation of the machine! Store your soldering tool in a safe place.
Operating controls Warranty Claims by the buyer for physical defects are time-barred after a period of one year from delivery to the buyer. This does not apply to claims by the buyer for indemnification in accordance with §§ 478, 479 BGB (German Federal Law Gazette. We shall only be liable for claims arising from a warranty furnished by us if the quality or durability warranty has been furnished by use in writing and using the term „Warranty“. The warranty shall be void if damage is due to improper use and if the device has been tampered with by unauthorised persons. ON / OFF Fault Stop Technical Data Starts the process of the currently loaded WinControl program. Start Piston soldering robot / Soldering WTBR-1000 After stopping, the machine starts the stopped movement in the machine exact place where it was interrupted, provided machining has not Dimensions L x W x H (mm) 1100 x 900 x 950...
Page 16
DIN EN 60204-1:2014-10 DIN EN 61000-6-4:2012-05 DIN EN 61000-6-2:2009-06 Besigheim, 2018-01-29 T. Fischer B.Frühwald Global Quality Manager Managing director Authorised to compile technical documentation. Weller Tools GmbH Carl-Benz-Straße 2, 74354 Besigheim, Germany 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
Need help?
Do you have a question about the WTBR 1000 and is the answer not in the manual?
Questions and answers