Summary of Contents for Videosec 24FE(PoE)+2GE+2G SFP
- Page 1 PS24FE+2GE+2SFP User Guide 16FE(PoE)+2GE+2G SFP Colorful LCD Display PoE Switch 24FE(PoE)+2GE+2G SFP Colorful LCD Display PoE Switch...
-
Page 2: Package Contents
If any part is lost and damaged, please contact your local agent immediately. 1. Introduction Thank you for choosing this PoE Switch. The 16/24FE(PoE)+2GE+2G SFP LCD Display PoE Provides 16(24)- 10/100Mbps PoE RJ45 Port have 2-Gigabit RJ45 port and 2-Gigabit SFP Slot. Its PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PD). -
Page 3: Hardware Description
2. Hardware Description 2.1 Front Panel The Front Panel of the PoE Ethernet Switch Consists of Ethernet Ports. The LCD Display and LED indicators are also located on the panel - 3 -... - Page 4 LED indicator Color Function Off: No Power supply. Green Light: Indicates the switch has power. Off: No device is connected to the corresponding port. Light: Indicates the link through that port is successfully established at10/ 100Mbps. Blink: Indicates that the Switch is actively sending or LNK/ACT Green receiving data over that port.
- Page 5 LCD Features The PoE Switch with the fun on of the LCD display and PoE. The LCD can display the working cond n of PoE port not only, s ll can accurately show the state of each port, such as: Output power, Overload, Short circuit, Light load, Low voltage, Over voltage,High temperature, and so on...
-
Page 6: Desktop Installation
3. Installation the Switch This part describes how to install your Ethernet Switch and make connec ons to it. Please follow the following instru ns in avoid of incorrect installa on causing device damage and security threat. Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet cloth or liquid;... - Page 7 3.2 Rack mountable installation The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack. To do this, first, please install the mounting brackets on the switch’s side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the switch on the 19 inch rack.
- Page 8 3.3 Turn on the switch Please plug the power supply into the switch, the internal power system of the switch can Auto-regulate the working power according to the actual input power. When the switch is power on, the power indicator will be light on the front panel of the switch shines.
-
Page 9: Specifications
Specifications Model 16FE(PoE)+2GE+2G SFP 24FE(PoE)+2GE+2G SFP IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3az, IEEE802.3x, Standard IEEE802.3af, IEEE802.3at 10BASE-T: UTP category 3,4,5 cable (≤100m) Network - 100BASE-TX: UTP category 5 cable (≤100m) Media(Cable) 1000BASE-T: UTP category 5e cable (≤100m) 1000BASE-X: MMF or SMF SFP module(Optional)