Package Contents Check the following contents of your package: PoE Switch x 1 User’s Manual x 1 Power Cord x 1 Accessories(hanging ears*2, Rubber Feet*4, screw*8) If any part is lost and damaged, please contact your local agent immediately. 1.
Page 3
LED indicator Color Func on Off: No Power supply. Green Light: Indicates the switch has power. Off: No device is connected to the corresponding port Light: Indicates the link through that port is successfully Orange established at 10/100Mbps. Blink: Indicates that the Switch is ac vely sending or receiving data over that port.
Page 4
3. Installation the Switch This part describes how to install your Ethernet Switch and make connections to it. Please follow the following instructions in avoid of incorrect installation causing device damage and security threat. Before cleaning the switch, unplug the power plug of the switch first. Do not clean the switch with wet cloth or liquid;...
Page 5
3.2. Rack-mountable Installation The switch is rack-mountable and can be installed on an EIA-19 inch equipment rack. To do this, first, please install the mounting brackets on the switch’s side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the switch on the 19 inch rack.
Page 6
Specifica ons Model 4GE(PoE)+4GE IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3az, IEEE802.3x, Standard IEEE802.3af, IEEE802.3at 10BASE-T: UTP category 3,4,5 cable (≤100m) Network - 100BASE-TX: UTP category 5 cable (≤100m) Media(Cable) 1000BASE-T: UTP category 5e cable (≤100m) LCD Display Support MAC Address Table 8K, Auto-learning, Auto-aging Transfer mode Store-and-Forward 10Base-T: 14881pps/Port...
Need help?
Do you have a question about the PSH04GE+4GE and is the answer not in the manual?
Questions and answers