Using The Tool Tips - Pioneer DJM-900NXS2 Quick Start Manual

MIDI
The MIDI feature in Serato DJ provides the ability to remap Serato DJ
software functions to your primary Serato DJ controller, interface or mixer.
You can also assign controls to a secondary MIDI controller to further
enhance your performance.
For more information on MIDI mapping with Serato DJ click here.
To remap your supported Serato DJ device, open the SETUP screen and
click the MIDI tab. If your Serato DJ device supports hardware remapping it
will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the
"Enable MIDI device" option is checked.
Once checked, the MIDI assign button at the top of the screen will become
available for you to start remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP
screen. Clicking 'Restore Defaults' will erase any custom mappings for all
connected devices and revert their functions back to default.
Download the Serato DJ software manual for further information.
NOTE: Official Serato Accessories do not currently support user remapping.
Hardware features that cannot be remapped at this stage are Jogwheels/
Platters, Input Switches, Shift buttons and Performance Pad Mode buttons.
Re-mapping any pad(s) in Hot Cue mode will also re-map the same pad in
Saved Flip mode and vice versa.

Using the Tool Tips

Click on the icon to enable Tool Tips. This is located in between the
MIDI and setup button in the top right hand corner of the screen. Tool Tips
provide a handy way to learn the various features of Serato DJ.
Move the mouse over a section of the screen to bring up a context sensitive
tool tip. Holding the mouse over the
will show you a list of all keyboard shortcuts.
For more information about how to use Serato DJ, please go to our website
www.serato.com or download the Serato DJ Manual.
For more information on your DJM-900NXS2, please refer to the Pioneer
DJM-900NXS2 hardware manual.
Recording
You are able to record the software mix with Serato DJ and the DJM-
900NXS2. To make sure your mixer is set up for recording, open the SETUP
screen and click the AUDIO tab. Launch the device driver panel by clicking
the DECK SETUP button at the top of the AUDIO tab.
Nominate a channel under the "Mixer Output" tab (we recommend USB9/10,
as this will not sacrifice any channels in Serato DJ) and select 'REC OUT' in
the dropdown for this dedicated Channel. This will give up this channel for
recording. Once you have selected a channel for recording, close the SETUP
screen and open the REC panel. Select the same channel you nominated as
the output for recording. This will now record the software mix.
For more information, please refer to the DJM-900NXS2 mixer's hardware
manual.
button with Tool Tips turned on