Table of Contents
Advertisement
7. WATER VALVE DISASSEMBLYMETHOD
1. Shut off water supplier and dispense water to purge water
system. Then turn off power from refrigerator. Open the F
Door.
2. Place a container on the floor and get ready to pour water
from the water tubes.
Then press the collet to separate the tube from the connector
and pour out the water until emptied.
(Refer to the label attached on Front L on how to separate
the tube).
• Disassembly
1. Pull out tube while pressing collets and disassemble it.
• Assembly
1.Insert tube until you can see only one line.
2. After inserting, pull out tube to check if it is properly
inserted.
Collet
Tube
Insert Line
Note: When replace the door, the pipe should be connected to
the same color.
3. Lock the water being supplied. Then separate the Water
connection connected to the Water Valve.
4. Separate the cover back MC and valve screw.
Cover Back M/C
5. Separate the housing and pull out the valve.
Housing
16
Water Valve
Valve Screw
Hide quick links:
Advertisement
Table of Contents
