Functional Description; Operation - Milwaukee M18 ONEFHIWF1 Operator's Manual

FUNCTIONAL DESCRIPTION

1
10
9
8
1. Side handle
2. Tool hanger ring
3. Tool hanger
4. Control switch
5. Handle
6. Drive control (not shown)
ASSEMBLY
Recharge only with the charger
WARNING
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
Always remove battery pack before
WARNING
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
Only use
WARNING
reco mmended
may be hazardous.
Installing the Side Handle
Detents
Groove
1. To install the side handle, loosen the side handle
knob until the ring loosens.
2. Slide the ring over the front of the tool until the
detents are resting in the groove.
3. Tighten the side handle knob until it is secure.
4. To adjust the side handle, loosen the knob and
rotate to the desired position. Tighten securely.
5. To remove the side handle, loosen the side handle
knob until the side handle can be removed.
2
3
4
5
6
7
7.
ONE-KEY™ coin
battery door
8. LED
9. Trigger
Square drive anvil
10.
with friction ring
accessorie s
for thi s tool. Others
Knob
Attaching and Removing the Tool Hanger
1. To attach, place the hanger ring through the tool
hanger.
2. Position the tool hanger on the tool over the two
screw holes.
3. Insert the two screws. Hand tighten the screws.
4. To remove, reverse the procedure.
Use on
WARNING
sor
use on impact wrenches and drivers. Other
sockets and accessories might shatter or break
causing injury.
Attaching and Removing Accessories
1. Use only the appropriate size Square Drive Sockets.
2. To attach a socket, align the accessory with the
3. To remove the accessory, pull the accessory off
the anvil.
To learn more about the ONE-KEY™ functionality for
this tool, please reference the Quick Start guide in-
cluded with this product or go to milwaukeetool.com/
One-Key. To download the ONE-KEY™ app, visit the
App Store or Google Play from your smart device.
ONE-KEY™ Indicator
Solid Blue Wireless mode is active and ready
app.
Blinking Blue Tool is actively communicating with
the ONE-KEY™ app.
Blinking Red Tool is in security lockout and can
be unlocked by the owner via the
-
ONE-KEY™ app.
To reduce the ri
WARNING
wear proper eye protection marked
to comply with ANSI Z87.1.
When working in dusty situations, wear appro-
priate respiratory protection or use an OSHA
compliant dust extraction solution.
Always remove battery pack before changing
or removing accessories. Only use accessories
may be hazardous.
Using the Drive Control
The drive control button is used to adjust the torque,
rotation speed (RPM), and impact speed (IPM) for
the application.
To select the drive control mode:
1. Pull and release the trigger
to turn on the tool. The cur-
rent mode indicator is lit.
2. Press the drive control but-
ton to cycle through the
modes. Select wireless
to change the default set-
tings via the ONE-KEY™
App on your smart device. When the desired mode
indicator is lit, begin work.
NOTE: Select the torque range in accordance with
the equipment manufacturers fastening instruc-
tightening torque with a calibrated device.
Mode RPM
1 0-1000 0-1330
2 0-1100 0-1620
4
l y so ckets an d o
ies s pecific ally de
ONE-KEY™

OPERATION

sk of injury, always
Drive Control Button
Mode
Indicator
IPM Mode RPM
3 0-1400
4 0-1650
ther acces -
signe d for
ONE-KEY™
IPM
0-2100
0-2450