Advertisement
THE CHRONOGRAPH FUNCTION
With the crown in the normal position (0), your watch is ready to be
used as a stopwatch.
Tracking time-lapse starts with pressing the A-pusher. Doing so,
the center stop-second hand will start a measurement. Pressing
the A-pusher once again will stop the measurement. Pressing the
A-pusher a third time will continue the measurement from where it
was stopped.
Press the A-pusher again to stop the measurement and press the
B-pusher to reset the center stop-second hand to the zero position.
PAUSING & CONTINUING A TIME-LAPSE
In certain occasions, one wishes to pause a time-lapse, but conti-
nuing the measurement on the background. This is done the follo-
wing way:
Start the time-lapse starts by pressing the A-pusher. Doing so, the
center stop-second hand will start a measurement. Pressing the
B-pusher will pause this measurement. However, the measurement
will continue on the background.
Pressing the B-pusher once again will continue the time-lapse.
You will notice the center stop-second hand 'jumping' a bit, as it will
continue the measurement where it left before pausing it.
MEASURING A TIME-LAPSE
Advertisement
