Advertisement
DATE SETTING
If a month has fewer than 31 days, you will need to set the date
manually to the first day of the following month. Pull the crown out
to position (1). You can now set the date by turning the crown to the
left (direct advance).
TIME & WEEKDAY SETTING
Pull out the crown to position (2). This will stop the movement.
Now move the minute hand a few minute-strokes beyond the time
to be set. Then position the minute hand by moving it gently bac-
kward until it is precisely above the correct minute stroke. This en-
sures that the minute hand begins to run immediately when you
restart the movement.
To start the counter seconds-hand, push in the crown to position 0.
When setting the time, please be aware of the date change, which
always takes place at 12 midnight. If this change has already taken
place at 12 noon, you must move the hands forwards by 12 hours.
A full 24 hour rotation of the hour hand sets the day retrograde one
weekday further. Use full 24 hour rotations to set the correct day.
Advertisement
