Troubleshooting - Beko BKK 2162 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
6

Troubleshooting

Although the iron is plugged in, base does not heat up.
• The appliance may be improperly connected. >>> Check the plug and power
cable (1) of iron.
• Temperature setting button (2) may be at the Min. position. >>> Turn the
temperature setting button (2) up to the steam sign.
Iron does not generate steam.
• Water reservoir may not contain sufficient amount of water. >>> Fill the water
reservoir with water up to Max level.
• Steam adjustment knob (6) may be at the 0 position. >>> Take the steam ad-
justment button to steam position. >>> Iron base (3) may not be hot enough.
"Anti-Drip" system which prevents water dripping may be active. Turn the iron
temperature setting button (2) up to the steam sign. Seat the iron in a vertical
position and wait for the base to heat up.
Shock Steam – Vertical Steam does not function.
• These functions may have been used too frequently in a very short period of
time. >>> Keep ironing at a horizontal position and wait for a while before
using the shock steam function again. >>> Iron base may not be hot enough.
Turn the iron temperature setting button up to the steam sign. Seat the iron in
a vertical position and wait for the base to heat up.
Water drops fall down onto the fabric during ironing.
• You may not have fully closed the water refill lid (5). >>> Close the water refill
lid (5) completely.
Sediments and particles drop off from the base during ironing.
• If the water you use for your iron is too limy, such sediments may form. >>>
Use the self-clean function for once or a few times. In your next ironing ses-
sion, add soft water into your appliance.
The appliance drops water after it cools down or stored.
• You may have left the iron on a horizontal position while there is water in its
reservoir. >>> Empty the water reservoir.
Stains on the ironing base.
• Wet garments might have been ironed and the iron base (3) has had lime
stains. >>> After the appliance cools down to a satisfactory level, wipe the
iron base (3) with a microfiber knitted or cotton cloth soaked in vinegar.
Iron / User Manual
15 / 68 EN

Advertisement

Table of Contents
loading

Table of Contents