Preparing To Remove Components - Fujitsu LIFEBOOK E459 Operating Manual

Removing and installing components during servicing

Preparing to remove components

If you are going to remove or change system components, prepare for the removal as follows:
Please observe the safety information in chapter
Remove the power plug from the mains outlet !
► Switch the device off.
The device must not be in energy-saving mode !
► Close the LCD screen.
► Remove all the cables from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this surface to prevent the device from being scratched.
► Remove the battery (see
56
"Removing a battery", Page
"Important notes", Page
35).
15.
Fujitsu