Dip Switch Settings - Perle C-100MM Series Installation Manual

DIP Switch Settings

Note: All switch changes take effect immediately and will result in
a link reset on both fiber ports.
Link Mode (Switch 1)
Switch
Position
Up (default)
Down
Link Pass-Through: In this mode, the link state on one fiber
connection is directly reflected through the media module to the
other fiber connection.
Standard Mode: In this mode, each fiber link can be brought up
and down independently of each other. A loss of link on either fiber
connection can occur without affecting the other fiber connection.
Fast Ethernet Fiber to Fiber Media Module – Installation Guide
Mode
Link Pass-Through Mode
Standard Mode
5