Denon DRA-800H Owner's Manual page 106

Contents Connections
Playback in ZONE2
ZONE2
Input source
select
buttons
MUTE :
Front panel Display
Playback
1
2
X
POWER
3
VOLUME df
0 Setting the input source of ZONE2 as the "Source" allows you to play the same
106
Rear panel
Settings Tips
Press ZONE2 to set the operating zone to ZONE2 with
the remote control.
The ZONE2 button lights.
Press POWER X to turn on the ZONE2 power.
The ( indicator on the display lights.
Power in ZONE2 can be turned on or off by pressing ZONE2
0
ON/OFF on the main unit.
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
To perform an operation with the main unit, press ZONE2
0
SOURCE. Each time you press ZONE2 SOURCE, the input
source changes.
content in MAIN ZONE and in ZONE2, regardless of the type of input signal.
0 Set the input source of ZONE2 as the "Source" by pressing the ZONE2
SOURCE button on the main unit.
0 If the MAIN ZONE input source is changed while ZONE2 is selected as the
"Source", then ZONE2's input source will be changed to mirror the MAIN
ZONE's input source.
Remote
Appendix
Index