D-Link DAP-1610 Quick Install Manual page 6

Method Two: QRS Mobile Setup
Search for "QRS Mobile" on the App Store or Google
1
Play and download the QRS Mobile App to your
iPhone, iPad, or Android device. Do not launch the
app until step 4.
Plug your Range Extender into an available outlet
2
near your wireless router and wait until the
Status LED is blinking amber (this may take up to 3
minutes). You can move your Range Extender to a
more suitable location after it is set up.
You now need to connect to your Range Extender. Go to Wi-Fi Settings
3
on your mobile device. From the list of available Wi-Fi networks, select
the Wi-Fi Name (SSID) as listed on the supplied Wi-Fi Configuration card
and enter the Wi-Fi Password when prompted. Note: It is OK if you see an
"Internet may not be available" notification or similar during the setup process.
Once connected to your Range
4
Extender, launch the QRS Mobile
app, wait for the Introduction Screen
to change to the Welcome Screen
(this may take up to 30 seconds),
then tap Start to continue.
6
er Go to Wi-Fi S
Wi-Fi Name(SSID):
dlink-xxxx
Password: xxxxxxxx
Username: "Admin"
Password:" " (leave the field blank)
DAP-1610 Install Guide
QRS Mobile App
Wi-Fi Name(SSID):
Wi-Fi Password:
Your configuration
Username: "Admin"
Password:
DCCAROOWIFI0020
Up to 30
seconds