Summary of Contents for TeeJet MATRIX Blanchard REB3
Page 1
VOYAGER ® 570G U S E R M A N U A L I N S T A L L A T I O N M A N U A L ECTION ONTROL Blanchard REB3 Controller...
Page 2
When implementing any new equipment the buyer must take great care and pay attention. Any doubts as to correct operation/use should result in contacting TeeJet Technologies. Kind regards, Mølhavevej 2 9440 Aabybro Denmark Tel.
Page 4
SYSTEM OVERVIEW, MATRIX xxx-xxx xxyyxx 1008-0201 www.teejet.com...
Page 5
Blanchard REB3 system. As shown in System Overview, the Optima Module Interface (Pos. 7) serve as a Link between the Blanchard REB3 Controller (Pos. 8) and the Section Driver Module (Pos. 4). www.teejet.com...
Page 6
SYSTEM OVERVIEW, CL230 xxx-xxx xxyyxx 1008-0201 www.teejet.com...
Page 7
Blanchard REB3 system. As shown in System Overview, the Optima Module Interface (Pos. 6) serve as a Link between the Blanchard REB3 Controller (Pos. 7) and the Section Driver Module (Pos. 3). www.teejet.com...
Page 8
1008-0189 Battery Cable (Option) If a power connector (Socket) isn't available in the tractor cabin, a optional battery cable can be used (PN 96ET14). www.teejet.com...
Blanchard REB3 Controller / Switch Box: • Switches on REB3 computer are deactivated once the CAN interface is connected. • Please use switches on the TeeJet switchbox to manually drive the section valves. • Switches should be in OFF position when working in Automatic mode.
Page 10
ON when power is applied to the CenterLine 230 and the SDM. LED’S ON THE OPTIMA INTERFACE ON when power is available for the interface. Tx Bus Can: Flashing when it transmit data. Rx Bus Can: Flashing when it receive data. www.teejet.com...
Need help?
Do you have a question about the MATRIX Blanchard REB3 and is the answer not in the manual?
Questions and answers