Table of Contents
Advertisement
Adjusting the volume
There are three volume levels for the musical tones and sound effects that
AIBO emits. The volume levels can be adjusted with the sound controller.
1
Make sure the switch is set to A or B.
With this setting, you can use the controller with the numeric
commands.
2
Make sure the sound controller is turned on.
When the power is on, all the controller lights light up.
To turn the power on, press the
3
Hold the sound controller towards AIBO and press the buttons as listed below to adjust
the volume.
AIBO responds in the newly set level.
If you send the command to raise the volume when it is already set to
the highest level, AIBO will respond in that level and not any higher.
If you send the command to lower the volume when in the lowest level,
AIBO will respond in that level and not any lower.
To
Lower the volume one level
Raise the volume one level
If AIBO does not respond to commands
When set for the numeric commands, press "8"t"0"t"SEND" to match AIBO's
command type to that of the sound controller.
AIBO does not accept commands while it emits sounds.
button.
C
Press
8 t 4 t
SEND
8 t 6 t
SEND
Charging the battery pack and
adjusting the volume
79
Advertisement
Table of Contents
