Table of Contents
Advertisement
AIBO's autonomous activities
Changing the sleeping AIBO to autonomous mode
Gently shake AIBO awake. If AIBO is sleeping on the station, first move it to a flat
surface and place it properly (see page 41), then wake it up.
If AIBO does not respond to commands
When set for the numeric commands, press "8"t"0"t"SEND" to match AIBO's
command type to that of the sound controller.
AIBO does not accept commands while it emits sounds.
When operating with single sound commands or with musical instruments
See "List of commands" on page 91 and send the appropriate musical tones according
to the command number.
51
Advertisement
Table of Contents
