Vax Cordless Slim Vac Series Manual page 13

Using as a reach slim vacuum cleaner
The reach wand can be used for hard to reach places.
Press the Power Head/
accessory release clip
and pull to remove the
Powered Head from the
reach wand.
Squeeze the trigger and
push the 'Continuous
power latch' towards the
trigger. This will lock it
into the 'On' position and
will continue to power the
machine without having
to hold in the trigger.
Push the latch away from
the trigger to unlock and
release the trigger.
Choose an accessory
(pictures illustrated
dependent upon model).
The reach wand can be used for hard to reach places
and at different heights for above floor cleaning.
Using your machine
Push the chosen
accessory into the
reach wand until it
clicks into place.
Squeeze the trigger
located underneath the
handle, the machine will
switch 'On'. The On/Off
and charging light will
illuminate green indicating
the power is on and the
machine is charged.
Release the trigger to
switch the machine 'Off'.
The upright slim vacuum
cleaner is not free standing
and in between uses must
always be placed in the
wall bracket or laid flat
on the floor, in a suitable
location so it does not
become a trip hazard or
can be stepped on.