Samsung CS301BN2X Service Manual page 22

更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
Alignment and Adjustments
4-3-7 White Balance Adjustment
4-3-7 (A) HIGH-LIGHT ADJUSTMENT
1. Input either a Lion Head or a Òpure whiteÓ
pattern.
2. Warm up the TV for 30 minutes.
3. Check the data in the Service Mode
(RG,GG,BG Should be 31, initially)
4. Adjust RG, BG in the Factory Mode.
4-3-8 Center Convergence Adjustment
1. Warm up the receiver for at least 20 minutes.
2. Adjust the two tabs of the 4 pole magnets to
change the angle between them. Superimpose
the red and blue vertical lines in the center
area of the screen.
3. Adjust the Brightness and Contrast controls for
a well defined picture.
4. Adjust the two-tab pairs of the 4 pole magnets,
and change the angle between them.
Superimpose the red and the blue vertical
lines in the center area of the screen.
BLUE
BLUE
RED
4-Pole Magnet Movement
4-8
RED
Fig. 4-3 Center Convergence Adjustment
4-3-7 (B) LOW-LIGHT ADJUSTMENT:
1. Automatically accomplished during the high-
light adjustment.
5. Turn the both tabs at the same time, keeping
the angle constant, and superimpose the red
and blue horizontal line in the center of the
screen.
6. Adjust the two-tab pairs of the 6-pole magnets
to superimpose the red and blue line onto the
green. (Changing the angle affects the vertical
lines, and rotating both magnets affects the
horizontal lines.)
7. Repeat adjustments 2~6, if necessary.
8. Since the 4-pole magnets and 6-pole magnets
interact, the dot movement is complex
(Fig. 4-3).
RED/BLUE
RED/BLUE
GREEN
6-Pole Magnet Movement
GREEN
Samsung Electronics