Removing Access Codes - Progeny Chameleon Manual

REMOVING ACCESS CODES

Removing Individual Access Codes
Follow the same procedure as for adding access codes except after select the
slot containing the access code in question simply press  or #. This will clear the
code contained at that slot.
Removing All Cards and Access Codes
All access codes can be removed by removing power to the controller then while
holding the number 2 key apply power only releasing the key when a beep is
heard from the control unit.
Removing All Cards
All cards can be removed by removing power to the controller then while holding
the number 1 key apply power only releasing the key when a beep is heard from
the control unit.
Removing All Codes
All access codes can be removed by removing power to the controller then while
holding the number 3 key apply power only releasing the key when a beep is
heard from the control unit.
Page 20