Connecting The Power Cable - UHL Instruments X4 V Series Owner's Manual

Connecting the Power Cable

The X3 runs on AC power: 100, 120, 230, or 240 volts at 50–60 Hz. The voltage level is set automatically. Make
sure the X4 V power switch is set to off before you connect the power cable. Plug the cable into a grounded
outlet only.
Make sure that your power outlet delivers an appropriate voltage level as described above.
The power cable may vary according to the country where you bought your X4 V. Do not manipulate the
cable or plug. If your power source does not have a standard grounded outlet, you should have a proper
grounding system installed by an expert before using the X4V. This will reduce the risk of a shock.
C o p y r i g h t b y U h l - I n s t r u m e n t s M a n u a l Seite 8