Power-Saving Mode; Modes - Silvercrest SFM 4 A1 Operating Instructions Manual

The operating system recognises the new hardware
and automatically installs the necessary drivers . After
the installation of the driver, the wireless mouse is ready
for operation and can be used .

Power-saving mode

The wireless mouse is equipped with a power-saving mode .
■
If you switch the computer off, the wireless mouse
automatically switches off after around 8 minutes
in order to save power .
■
If you disconnect the nano-USB receiver 0 from the
computer, the wireless mouse automatically switches
off after around 8 minutes in order to save power .
■
If you do not click, scroll or move the wireless mouse,
it turns off after about 8 minutes . As soon as you
press any button on the wireless mouse or use the
scroll wheel, the wireless mouse switches back on .
Changing operating modes
You can use the DPI button 4 to switch the optical sam-
pling between the resolutions 1000 dpi, 1500 dpi and
2000 dpi . The higher the resolution, the more accurate
the wireless mouse's sampling .
■ 60 │ GB │ MT
SFM 4 A1