Setting The Signal Type; Setting The Volume - Silvercrest 43150 Assembly, Operating And Safety Instructions

The receiver can indicate the reception of a door signal either both
optically and acoustically, acoustically or optically.
43150_Funktürklingel_content_RO_BG.indd 17

Setting the signal type

Using the signal type selector button
signal is to be indicated both optically and acoustically or acous-
tically or optically.
Press the signal type selector button
signal will sound up and the afterwards the signal indicator
will flash. The receiver will now indicate the door signal acousti-
cally and optically. Press again the signal type selector button
An acoustical signal will sound. The receiver will now indicate the
door signal acoustically. Press again the signal type selector
button . The receiver will now indicate the door signal in an
3
optical way.

Setting the volume

Press the volume button
There are a total of 4 possible volume settings: very loud, loud,
medium, soft.
, select whether the
3
once. An acoustical
3
until the desired volume is reached.
5
1
.
3
GB/CY 17
26.03.14 15:59